Belt Drive DVD-ROM / G0704 DVD-ROM Super Combo Download
Visit our parent site!
G0704 Max Realistic Rapid Speed
G0704 Belt Drive DVD-ROM / G0704 DVD-ROM and Projects 15 Download Super Combo Download
 G0704 Belt Drive / G0704 DVD-ROM Combo Download
Read the G0704 DVD-ROM Introduction Here!

Any questions or special requests, Contact Me Here
G0704 belt drive dvdrom Combo phase 3_800x538

G0704 belt drive dvdrom Combo phase 3_800x538

Get Both DVD-ROM Downloads
and the Projects 15 Download
Read the G0704 Belt Drive DVD-ROM Introduction Here!
Works with
and Linux too!
Now Includes plans for extending the
Y travel to 9.5 inches and the Z to 18 inches.
Watch the Video here! Also the option of mounting the Y stepper in
the rear!
Watch the Video here!
The plans now have prints
to allow using C7 ballscrews and nuts from Ebay. They can be ordered with the ends machined to fit the same Phase 2 CNC Conversion parts here for around $200.
Also mods to the X nut etc. needed to fit under the table.
All ordering info supplied.

You can purchase the machined C7 ballscrews and nuts for the basic ballscrew CNC conversion
with the front mounted Y axis from Automation Technology
PLUS You get the Projects 15 Download along with the 2 DVD-ROM Downloads
The DVDROM downloads contain every file included on the hardcopy DVDROMs. Also includes the Projects 15 Download. The .zips can be extracted with Winzip. Upon purchase, download info and  passwords to unlock the zip files will be emailed to your paypal email address within 24 hours unless an alternate address is given.
Please check your spam folder if you don't recieve it by then.
The hardcopy DVDROMs are NOT included with this purchase.
All Sales Final!